Click image to view full size image
Alloy steel flange
GlenFlange is a supplier of flanges in different types of material that we divide in: alloy steel, duplex/super duplex steel, nickel alloys/ Titanium and copper nickel alloys. We provide aluminum alloy flanges with the characteristics: These steels have greater strength, hardness, hot hardness, wear resistance, harden ability, or toughness compared to carbon steel. However, they may require heat treatment to achieve such properties. Common alloying elements are molybdenum, manganese, nickel, chromium, vanadium, silicon and boron.
Available forms are Alloy Steel Pipes & Tubes, Alloy Steel Round Bars, Alloy Steel Sheets & Plates, Alloy Steel Pipe Fittings, Alloy Steel Forged Fittings, Alloy Steel Fasteners, Alloy Steel Valves, Alloy Steel Flanges
Type of Flanges:
· Weld Neck
· Slip-on
· Blind
· Socket Weld
· Lap Joint
· Spectacles
· Ring Joint
· Orifice etc.
Specifications and Steel Grades:
· Alloy Steel: ASTM A182 F1/ F5/ F9/ F11/ F22/ F91/ etc.
· Stainless Steel: ASTM A182 F304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/904L/ etc.
· Super Stainless Steel: ASTM 904L, B625-N08904, 317, 317L, 254SMO
· Duplex&Super Duplex Steel: ASTM A182-F51(S31803)
· 70/30 Copper - Nickel Alloy, 90/10 Copper - Nickel Alloy, 80/20 Copper - Nickel Alloy
· TA1、TA2、TA10、TC4、Gr2、Gr3、Gr5
Manufacture Specification
ISO7005-I, ASME/ASNI B16.5/16.36/16.47A/16.47B, MSS SP44, JIS B2220 DIN2527/2636/2637/2638/2566/2576/2632/2633/2635/2642/2653/2655/2656
BS 1560-3.1, BS4504-3.1
API 7S-15, API 7S-43, API 605, NFE 29-203 EN1092
Pressure Ratings :
· 150#, 300#, 400#, 600#, 900#, 1500# & 2500#. PN6, PN10, PN16, PN25, PN40, PN64 etc.
· Sizes from ½" to 60".
Chemical Composition ( IN PERCENTAGE )
ALLOY STEEL
|
Chemical Composition,% |
Tensile Test |
||||||
Designation |
C max. |
Si |
P max |
S max |
Tensile Strength Kgf/mm2 |
Yield Point Kgf/mm2,min. |
Elongation |
|
Test Piece |
%, min |
|||||||
IS 2002-1 |
0.18 |
.010-0.35 |
0.40 |
0.40 |
37-45 |
55 |
5.65/So |
26 |
IS 2002-2A |
0.20 |
0.10-0.35 |
0.050 |
0.050 |
42-50 |
50 |
5.65/So |
25 |
IS 2002-2b |
0.22 |
0.10-0.35 |
0.050 |
0.050 |
52-62 |
50 |
5.65/So |
20 |
QUALITY ASSURANCE, CONTROL AND TESTING
We are familiar with additional testing and -certification in accordance with national and international standards and specific customers’ requirements. |
E-mail: 